ZyXEL Communications ZYWALL USG 2000 Support Notes page 111

ZyWALL USG 2000 Support Notes
Between Master and Backup Role, the difference in settings is the Management IP
configuration. The Backup ZyWALL will copy all the settings from the Master Device so we
need a management IP to access and configure the Backup Device.
Step4. Unplug the PC cable from Backup ZyWALL wan1 and plug it back to L2 switch LAN
segment. Connect all the cables from L2 and L3 switches to the Backup ZyWALL as on the
network topology diagram shown on the index page. Login to the Backup ZyWALL via the
management IP. Now we can synchronize the configuration from the Master to the Backup.
Switch to ZyWALL > Device HA > Acitve-Passive Mode> Synchronize and enter the
Master ZyWALL admin account password. Input the LAN IP address of the Master ZyWALL
111
All contents copyright (c) 2008 ZyXEL Communications Corporation.