ZyXEL Communications ZYWALL USG 2000 Support Notes page 135

1) Login the GUI in the ZyWALL USG 2000 and navigate to Configuration > Network >
Interface > Ethernet. Then, assign wan1 as WAN, P4 as lan1 and P6 as DMZ. Click "edit"
to configure WAN1.
2) Assign IP to wan1 and another to DMZ. Leave the reset of settings as default which will
disable the DHCP Server in these two interfaces.
Tips: You do not need a Gateway here since this interface is directly connected to ZyWALL
All contents copyright (c) 2008 ZyXEL Communications Corporation.
ZyWALL USG 2000 Support Notes
135