ZyXEL Communications ZYWALL USG 2000 Support Notes page 159

Here we need to modify the "Next-Hop" from "WAN_TRUNK" to "Interface" of the Bridge
interface (br1) that we just created.
Then click "OK" at the bottom to save the changes.
Tips for application:
Disable the Firewall to test the connectivity.
Every time you make a change, don't forget to click the "apply" button
3.1.2 NAT & Virtual Server
Here is an example:
There is a web server located in the DMZ zone. The virtual Server setting in ZyWALL USG
2000 is required here for people outside of WAN to access the Web pages located on the Web
All contents copyright (c) 2008 ZyXEL Communications Corporation.
ZyWALL USG 2000 Support Notes
159