ZyXEL Communications ZYWALL USG 2000 Support Notes page 108

ZyWALL USG 2000 Support Notes
Step4. After applying all the routing settings, the PC in ZyWALL LAN subnet can
communicate with the ZyWALL 2.
Setup Device HA (Activate-Passive)
We will configure the Device HA setting on master ZyWALL USG 2000 first. Then we can
connect the Backup ZyWALL cables to L3 and L2 switch and then synchronize the
configuration from Master. The Device HA will be ready after this and Backup ZyWALL
108
All contents copyright (c) 2008 ZyXEL Communications Corporation.