ZyWALL USG 2000 Support Notes
Steps:
Setup Master ZyWALL USG 2000 and the configuration will auto sync with Backup
ZyWALL USG 2000 via the device HA setting.
1. Interface setup
The default LAN subnet is combined with ge1 and default IP is 192.168.1.1. Please connect to
LAN port and ZyWALL USG 2000 will dispatch an IP for your PC. Then we can start to setup
the basic interface and routing setting.
Step1. Login to device and check the device status
Step2. We can check all the interface information on the Status display page.
102
All contents copyright (c) 2008 ZyXEL Communications Corporation.