ZyXEL Communications ZYWALL USG 2000 Support Notes page 160

ZyWALL USG 2000 Support Notes
Server in the DMZ zone.
To make this scenario work; follow the configuration steps stated below:
1) Login ZyWALL USG 2000 GUI and setup the WAN1 interface for internet connection and
manually assign a static IP. Login ZyWALL USG 2000 GUI and go to Network > Interface >
Edit > WAN1
2) Switch to General > Network > Virtual Server and add a new Virtual Server. Fill in the
mapping information. In our example here, since WAN1 is our WAN port, we are going to
map any IP from the WAN port to our internal Web Server, which is 192.168.1.55. And in this
case, our web server is running on TCP 80, therefore, we pick TCP 80 for our mapping.
160
All contents copyright (c) 2008 ZyXEL Communications Corporation.