ZyXEL Communications ZYWALL USG 2000 Support Notes page 42

7) The name for this object can be for example "Remote_Subnet". The Network IP Address
and the Subnet Mask are the remote site LAN subnet. In this example, enter 192.168.1.0
in Network text box and then type 255.255.255.0 in Subnet Mask text box. Then press
OK. Now after the address object successfully configured, the new address object
"Remote_Subnet" can be selected from the destination network drop down list.
8) Switch to Proposals tab. In IKE (Phase1) proposal settings, select Main mode, set DH
Group to Group1, Encryption to DES and Authentication to MD5. In IPSec (Phase2)
proposal settings, select ESP Protocol, Encryption to DES and Authentication to SHA1.
Then press the OK button.
All contents copyright (c) 2008 ZyXEL Communications Corporation.
ZyWALL USG 2000 Support Notes
7
8
42