ZyXEL Communications ZYWALL USG 2000 Support Notes page 106

ZyWALL USG 2000 Support Notes
User's pc network connection will disconnect and get the new IP address from ZyWALL USG
2000 after applying the ge1's new setting.
Configure the interface to correspond Zone
Step1. Switch to ZyWALL > Network > Zone and click the "Edit" icon to modify the setting.
Step2. The default setting of ZyWALL is having three Zones. User can add more Zones or
modify the Zone's name if they wish. The main purpose of Zone is to add the security
checking between different interfaces. The default interface for LAN zone is binding with ge1,
WAN zone is binding with ge2 and ge3, DMZ zone is ge4 and ge5.
Step3. Check the interface summary page to confirm the settings. (ZyWALL >Network
>Interface >Interface Summary)
106
All contents copyright (c) 2008 ZyXEL Communications Corporation.