Troubleshooting An External Scsi Tape Drive - Dell PowerVault DL2000 Hardware Owner's Manual

Action
CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Try using a different CD or DVD that you know works properly.
2 Enter the System Setup program and ensure that the drive's IDE
controller is enabled. See "Using the System Setup Program" on page 45.
3 Run the appropriate online diagnostic test. See "Using Server
Administrator Diagnostics" on page 153.
4 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
5 Open the system. See "Opening and Closing the System" on page 66.
6 Ensure that the interface cable is securely connected to the optical drive
and to the sideplane.
7 Ensure that a power cable is properly connected to the drive.
8 Close the system. See "Opening and Closing the System" on page 66.
9 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the problem is not resolved, see "Getting Help" on page 167.

Troubleshooting an External SCSI Tape Drive

Problem
• Defective tape drive
• Defective tape cartridge
• Missing or corrupted tape-backup software or tape drive device driver
• Defective SCSI controller
144
Troubleshooting Your System
Many repairs may only be done by a certified service technician. You