Dell PowerVault DL2000 Hardware Owner's Manual page 21

NOTE:
If your system fails to boot, press the System ID button for at least five
seconds until an error code appears on the LCD. Record the code, then see "Getting
Help" on page 167.
Table 1-6. LCD Status Messages
Code Text
N/A SYSTEM NAME
E1000 FAILSAFE,
Call Support
E1114 Temp Ambient
E1116 Temp Memory
E12 nn xx PwrGd
E1210 CMOS Batt
E1229 CPU # VCORE
Causes
A 62-character string that
can be defined by the user in
the System Setup program.
The SYSTEM NAME
displays under the
following conditions:
• The system is powered on.
• The power is off and
active POST errors are
displayed.
Ambient system
temperature is out of
acceptable range.
Memory has exceeded
acceptable temperature
and has been disabled to
prevent damage to the
components.
Specified voltage regulator
has failed.
CMOS battery is missing,
or the voltage is out of
acceptable range.
Processor # VCORE
voltage regulator has
failed.
Corrective Actions
This message is for
information only.
You can change the system
ID and name in the
System Setup program.
See "Using the System
Setup Program" on
page 45.
See "Getting Help" on
page 167.
See "Troubleshooting
System Cooling Problems"
on page 140.
See "Troubleshooting
System Cooling Problems"
on page 140.
See "Getting Help" on
page 167.
See "Troubleshooting the
System Battery" on
page 138.
See "Getting Help" on
page 167.
About Your System
21