Installing A Processor - Dell PowerVault DL2000 Hardware Owner's Manual

Figure 3-21. Installing and Removing a Processor
1
6
1 notch in processor (2)
3 socket-release lever
5 ZIF socket
13 Lift the processor out of the socket and leave the release lever up so that
the socket is ready for the new processor.
NOTICE:
the processor. Bending the pins can permanently damage the system board.

Installing a Processor

1 Unpack the new processor.
2 Align the processor with the socket keys on the ZIF socket. See Figure 3-21.
3 Install the processor in the socket.
NOTICE:
system board or the processor when you turn it on. When placing the processor in
the socket, be careful not to bend the pins in the socket.
If the release lever on the processor socket is not positioned all the way
a
up, move it to that position.
108
Installing System Components
Be careful not to bend any of the pins on the ZIF socket when removing
Positioning the processor incorrectly can permanently damage the
2
5
2 processor
4 processor shield
6 socket key (2)
4
3