Lcd Status Messages - Dell PowerVault DL2000 Hardware Owner's Manual

Figure 1-5. NIC Indicators
Table 1-5. NIC Indicator Codes
Indicator
Link and activity indicators are off
Link indicator is green
Activity indicator is amber blinking

LCD Status Messages

The system's control panel LCD provides status messages to signify when the
system is operating correctly or when the system needs attention.
The LCD lights blue to indicate a normal operating condition, and lights
amber to indicate an error condition. The LCD scrolls a message that
includes a status code followed by descriptive text. Table 1-6 lists the LCD
status messages that can occur and the probable cause for each message.
The LCD messages refer to events recorded in the System Event Log (SEL).
For information on the SEL and configuring system management settings,
see the systems management software documentation.
CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
20
About Your System
1
1 link indicator
Many repairs may only be done by a certified service technician. You
2
2 activity indicator
Indicator Code
The NIC is not connected to the network.
The NIC is connected to a valid link
partner on the network.
Network data is being sent or received.