Configuration Screen; Figure 111 Firmware Upload In Process; Figure 112 Network Temporarily Disconnected; Figure 113 Firmware Upload Error - ZyXEL Communications P-2302R-P1 Series User Manual
Voip ata/station gateway
Hide thumbs
Also See for P-2302R-P1 Series:
- Support notes (146 pages) ,
- Quick start manual (15 pages) ,
- Declaration of conformity (1 page)
Table of Contents
Advertisement
Figure 111 Firmware Upload In Process
The process usually takes about two minutes. The device automatically restarts in this time.
This causes a temporary network disconnect. In some operating systems, you may see the
following icon on your desktop.
Figure 112 Network Temporarily Disconnected
After two minutes, log in again, and check your new firmware version in the Status screen.
You might have to open a new browser to log in.
If the upload is not successful, the following screen appears.
Figure 113 Firmware Upload Error
Click Return to go back to the
21.2.3 Configuration Screen
Use this screen to back up or restore the configuration of the ZyXEL Device. You can also use
this screen to reset the ZyXEL Device to the factory default settings. To access this screen,
click Maintenance > Tools > Configuration.
Chapter 21 Tools
Firmware
Screen.
P-2302R-P1 Series User's Guide
227
Advertisement
Table of Contents
