Bandwidth Monitor Screen - ZyXEL Communications P-2302R-P1 Series User Manual

P-2302R-P1 Series User's Guide
Table 71 Management > Bandwidth MGMT > Class Setup > Edit
LABEL
Application
Destination IP
Address
Destination
Subnet Mask
Destination Port
Source IP Address Enter the source IP address.
Source Subnet
Mask
Source Port
Protocol ID
Apply
Cancel

15.2.4 Bandwidth Monitor Screen

Use this screen to look at the device's bandwidth usage and allocation. To access this screen,
click Management > Bandwidth MGMT > Monitor.
172
DESCRIPTION
Select a pre-defined application. If you select a predefined application, do not set
up the other filter criteria.
FTP (File Transfer Program) enables fast transfer of files, including large files that
may not be possible by e-mail. Select this to configure the bandwidth filter for FTP
traffic.
SIP (Session Initiation Protocol) is a signaling protocol used in VoIP, instant
messaging, events notification and conferencing. The ZyXEL Device supports SIP
traffic pass-through. Select this to configure this bandwidth filter for SIP traffic. This
makes it easier to manage bandwidth for SIP traffic and is useful, for example,
when there is a VoIP (Voice over Internet Protocol) device on your LAN.
Enter the destination IP address.
This field is effective if you specify a Destination IP Address.
Enter the destination subnet mask.
Enter the destination port number.
This field is effective if you specify a Source IP Address.
Enter the source subnet mask.
Enter the source port number.
Enter the IP protocol number (service type); for example, 1 for ICMP, 6 for TCP or
17 for UDP.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
Chapter 15 Bandwidth MGMT