Packet Statistics Window - ZyXEL Communications P-2302R-P1 Series User Manual

P-2302R-P1 Series User's Guide
Table 27 BW MGMT Monitor Window
LABEL
WAN-FTP
WAN-E-Mail
Default Class
Poll Interval
Set Interval
Stop

5.6 Packet Statistics Window

To access this screen, open the Status screen (see
...) next to Packet Statistics.
80
DESCRIPTION
This field displays how much FTP traffic went to the WAN each second. The rate is
the number of kilobits that went to the WAN one second before the last time the
screen updated (refreshed).
This field displays how much e-mail went to the WAN each second. The rate is the
number of kilobits that went to the WAN one second before the last time the screen
updated (refreshed).
This field displays how much traffic that is not allocated to any sub-class went to
the WAN each second. The rate is the number of kilobits that went to the WAN one
second before the last time the screen updated (refreshed). This might include SIP
traffic, FTP traffic, e-mail, or web traffic, depending on what traffic is allocated to
sub-classes. You can change what traffic is allocated to sub-classes in
Management > Bandwidth MGMT > Class Setup.
Enter how often you want the ZyXEL Device to update this screen, and click Set
Interval.
Click this to make the ZyXEL Device update the screen based on the amount of
time you specified in Poll Interval.
Click this to make the ZyXEL Device stop updating the screen.
Section 5.1 on page 71), and click (Details
Chapter 5 Status Screens