P-2302R-P1 Series User's Guide
3.4.3 Services Setup
Figure 25 Bandwidth Management Wizard > Services Setup
The following table describes the labels in this screen.
Table 19 Bandwidth Management Wizard > Services Setup
LABEL
Service
< Back
Next >
Exit
66
DESCRIPTION
Select the service(s) that should have higher priority when bandwidth is allocated.
If you do not select a service or if you do not see it in the list, the service can still
use bandwidth. However, it has the lowest priority.
Note: You must select at least one service in this screen.
Each service you select (except WWW) becomes a LAN sub-class and a WAN
sub-class in
Management > Bandwidth MGMT > Class
it only becomes a LAN sub-class.
Click this to go to the previous screen.
Click this to go to the next screen.
Click this to close this screen and return to the main screen.
Setup. If you select WWW,
Chapter 3 Wizard Setup