P-2302R-P1 Series User's Guide
Table 87 Maintenance > Logs > View Log
LABEL
Message
Source
Destination
Note
20.2.2 Log Settings Screen
Use this screen to configure where the ZyXEL Device sends logs and alerts, the schedule for
sending logs, and which logs and alerts are sent or recorded.
To access this screen, click Maintenance > Logs > Log Settings.
212
DESCRIPTION
This field displays the reason for the log. See
This field displays the source IP address and the port number of the incoming
packet. In many cases, some or all of this information may not be available.
This field lists the destination IP address and the port number of the incoming
packet. In many cases, some or all of this information may not be available.
This field displays additional information about the log entry.
Section 20.3 on page
215.
Chapter 20 Logs