Figure 133 Red Hat 9.0: Kde: Ethernet Device: General; Figure 134 Red Hat 9.0: Kde: Network Configuration: Dns - ZyXEL Communications P-2302R-P1 Series User Manual

Figure 133 Red Hat 9.0: KDE: Ethernet Device: General

• If you have a dynamic IP address, click Automatically obtain IP address settings
with and select dhcp from the drop down list.
• If you have a static IP address, click Statically set IP Addresses and fill in the
Address, Subnet mask, and Default Gateway Address fields.
3 Click OK to save the changes and close the Ethernet Device General screen.
4 If you know your DNS server IP address(es), click the DNS tab in the Network
Configuration screen. Enter the DNS server information in the fields provided.

Figure 134 Red Hat 9.0: KDE: Network Configuration: DNS

5 Click the Devices tab.
6 Click the Activate button to apply the changes. The following screen displays. Click Yes
to save the changes in all screens.
Appendix B Setting up Your Computer's IP Address
P-2302R-P1 Series User's Guide
246