Table 128 Nat Types - ZyXEL Communications P-2302R-P1 Series User Manual

P-2302R-P1 Series User's Guide
The following table summarizes how these NAT types handle outgoing and incoming packets.
Read the following sections for more details and examples.

Table 128 NAT Types

FULL CONE
Incoming Any external host
Packets can send packets to
the mapped
external IP address
and port.
Outgoing The NAT router maps the internal IP address and port of all
Packets outgoing packets to a single IP address and port on the
external network.
The examples in these NAT type sections describe NAT translation between internal (private)
and external (public) IP addresses.
Full Cone NAT
In full cone NAT, the NAT router maps all outgoing packets from an internal IP address and
port to a single IP address and port on the external network. The NAT router also maps
packets coming to that external IP address and port to the internal IP address and port.
In the following example, the NAT router maps the source address of all packets sent from the
ZyXEL Device's internal IP address 1 and port A to IP address 2 and port B on the external
network. The NAT router also performs NAT on all incoming packets sent to IP address 2 and
port B and sends them to IP address 1, port A.
264
PORT
RESTRICTED
RESTRICTED
CONE
CONE
Only external hosts Only external hosts
with an IP address with an IP address
to which the internal and port to which
host has already the internal host
sent a packet can has already sent a
send packets to the packet can send
mapped external IP packets to the
address and port. mapped external IP
address and port.
SYMMETRIC
A host on the external
network can only send
packets to the specific
mapped external IP
address and port that the
NAT router used in
sending a packet to the
external host's IP address
and port.
The NAT router maps the
internal IP address and
port of each outgoing
packet to a different
external IP address and
port for each different
destination IP address
and port.
Appendix E NAT