Nat Alg Screen; Figure 53 Network > Nat > Alg; Table 45 Network > Nat > Alg - ZyXEL Communications P-2302R-P1 Series User Manual

P-2302R-P1 Series User's Guide
Table 44 Network > NAT > Trigger Port
LABEL
Apply
Reset

8.2.5 NAT ALG Screen

Use this screen to enable and disable SIP (VoIP), FTP (file transfer), and H.323 (audio-visual)
ALG in the ZyXEL Device. To access this screen, click Network > NAT > ALG.
Figure 53 Network > NAT > ALG
Each field is described in the following table.
Table 45 Network > NAT > ALG
LABEL
Enable SIP ALG
Enable FTP ALG
Enable H.323 ALG Select this to make sure H.323 (audio-visual programs, such as NetMeeting) works
Apply
Reset
114
DESCRIPTION
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to delete every port-triggering rule.
DESCRIPTION
Select this to make sure SIP (VoIP) works correctly with port-forwarding and port-
triggering rules.
Select this to make sure FTP (file transfer) works correctly with port-forwarding and
port-triggering rules.
correctly with port-forwarding and port-triggering rules.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
Chapter 8 NAT