Logs Screens; Log Viewer Screen; Figure 108 Maintenance > Logs > View Log; Table 87 Maintenance > Logs > View Log - ZyXEL Communications P-2302R-P1 Series User Manual

Table 86 RFC-2408 ISAKMP Payload Types (continued)
LOG DISPLAY
DEL
VID

20.2 Logs Screens

20.2.1 Log Viewer Screen

Use this screen to look at log entries and alerts. Alerts are written in red. To access this screen,
click Maintenance > Logs > View Log.
Figure 108 Maintenance > Logs > View Log
Click a column header to sort log entries in descending (later-to-earlier) order. Click again to
sort in ascending order. The small triangle next to a column header indicates how the table is
currently sorted (pointing downward is descending; pointing upward is ascending). Each field
is described in the following table.
Table 87 Maintenance > Logs > View Log
LABEL
Display
Email Log Now
Refresh
Clear Log
#
Time
Chapter 20 Logs
PAYLOAD TYPE
Delete
Vendor ID
DESCRIPTION
Select a category whose log entries you want to view. To view all logs, select All
Logs. The list of categories depends on what log categories are selected in the
Log Settings page.
Click this to send the log screen to the e-mail address specified in the Log
Settings page.
Click Refresh to renew the log screen.
Click Clear Log to clear all the log entries, regardless of what is shown on the log
screen.
This field is a sequential value, and it is not associated with a specific log entry.
This field displays the time the log was recorded.
P-2302R-P1 Series User's Guide
211