Figure 107 Maintenance > System > Time Setting; Table 84 Maintenance > System > Time Setting - ZyXEL Communications P-2302R-P1 Series User Manual

P-2302R-P1 Series User's Guide
Figure 107 Maintenance > System > Time Setting
Each field is described in the following table.
Table 84 Maintenance > System > Time Setting
LABEL
Current Time and
Date
Time and Date
Setup
Manual
New Time
New Date
Get from Time
Server
Time Protocol
Time Server
Address
Time Zone Setup
Time Zone
206
DESCRIPTION
This section displays the current date and time.
Select this if you want to specify the current date and time in the fields below.
Enter the new time in this field, and click Apply.
Enter the new date in this field, and click Apply.
Select this if you want to use a time server to update the current date and time in
the ZyXEL Device.
Select the time service protocol that your time server uses.Check with your ISP or
network administrator, or use trial-and-error to find a protocol that works.
Daytime (RFC 867) - This format is day/month/year/time zone.
Time (RFC 868) - This format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC 1305) - This format is similar to Time (RFC 868).
Enter the IP address or URL of your time server. Check with your ISP or network
administrator if you are unsure of this information.
Select the time zone at your location.
Chapter 19 System