10.4 HEALTH AND SAFETY INSTRUCTIONS
!
!
The connection and commissioning of the air handling unit should be carried out by qualified
personnel and in accordance with the recommended regulations and guidelines relating to the
operation of electrical equipment.
!
Under no circumstances should the appliance be connected to a power source before the
protection system is activated.
!
Under no circumstances should repairs or maintenance work be carried out while the unit remains
connected to the power supply.
!
Operation of the air handling unit with the inspection panel removed is strictly prohibited.
!
Service, repair or maintenance personnel, designated for air handling units, must be qualified
and authorised to carry out all the required activities in accordance with the regulations in force
in the country where the unit is installed.
!
The installation location of the control panel must have the necessary safety equipment and fire-
fighting equipment/devices in accordance with local regulations.
!
!
Routine checks, carried out by qualified technical personnel or service personnel authorised by
VTS, guarantee long-term, reliable and trouble-free operation of the equipment. Our service
personnel are available at all times to provide support for commissioning, maintenance and in
the event of any emergency situation relating to the operation of the unit.
!
VTS authorised service stations sell spare parts and accessories for our air handling units. When
ordering parts, please specify the type of air handling unit, size and series number.
!
More information on the VTS service network can be found at www.vtsgroup.com.
www.vtsgroup.com
OIMM VENTUS COMPACT HP - ver.5.0.9 (10.2024)
115
Need help?
Do you have a question about the VENTUS COMPACT HP VVS021c and is the answer not in the manual?