Log In To Sunny Portal As An Existing User; Create New Pv System - SMA DATA MANAGER M Operating Manual

SMA Solar Technology AG
4. Select [Register].
☑ After a few minutes you will receive an e-mail containing a confirmation link for
registration in Sunny Portal.
5. If you have not received an e-mail from Sunny Portal, check whether the e-mail has been
redirected to a folder for junk mail or whether an incorrect e-mail address has been entered.
6. Follow the confirmation link in the e-mail within 48 hours.
☑ Sunny Portal opens a separate window to confirm successful registration.
7. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
8. Enter the e-mail address and the Sunny Portal password in the fields User and Password.
9. Select [Login].
7.5.3 Log in to Sunny Portal as an existing user
Requirement:
☐ You must have access to a user account in Sunny Portal, Sunny Places or Sunny Design.
☐ An active Internet connection must be established.
Procedure:
1. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
2. Enter the e-mail address and the Sunny Portal password in the fields User and Password.
3. Select [Login].
7.5.4

Create new PV system

The system setup assistant is a step-by-step guide to the processes required for the registration of
your system in Sunny Portal. In systems with a superordinate and subordinate System Manager, all
System Manager can be registered in one step.
Service access
To ensure the best service quality possible, activate the switch for service access during
registration.
Requirements:
☐ You must have access to a user account in Sunny Portal, Sunny Places or Sunny Design.
☐ The registration ID (RID), the product identification code (PIC) and the Internet address from
the device label must be available.
☐ The product must be in operation and connected to the local network via an Internet router.
☐ The system LED must glow green.
☐ An active Internet connection must be established.
Procedure:
1. Log into Sunny Portal.
2. Select the menu Configuration.
Operating manual
7 Commissioning
EDMM-20-BE-en-10 55