Figure 33 DLT Tape
Drive Front Bezel
(Example)
Lift each door handle straight up and then turn the handle
e
counterclockwise to unlatch each door.
f
Gently pull on each door handle to open the door.
2 Press the
button on the drive (see
Unload
When you press
Unload
between 10 to 120 seconds. When the rewind process is completed,
the Operate Handle indicator comes on.
3 When the Operate Handle indicator comes on, raise the insert/
release handle to eject the tape cartridge.
Note:
Place your finger approximately 1/4 of an inch in front of
the drive's cartridge opening to ensure that the cartridge
does not drop when ejected.
Caution:
Pause for at least 3 seconds, then grasp the tape
cartridge and slowly pull it half way out of the drive.
Caution:
If the tape cartridge leader failed to detach from the
take-up leader, push the tape cartridge all of the way
back into the drive, press down the insert/release
handle, and return to step 2. Otherwise, continue to
step 4.
Quantum P4000 and P7000 Libraries User's Guide
Chapter 2 Basic Library Operations
Manually Ejecting a Tape Cartridge
figure
, the tape cartridge rewinds. This may take
Unload button
33).
Insert/release
handle
(shown in up position)
59