Quantum P4000 User Manual page 133

With the help of at least one person, roll the library to a position
b
in front of the pallet ramp.
c Roll the library onto the pallet.
3 Secure the library.
a Place the shipping bag over the library, and secure it into place.
Remove the ramp sections from the pallet and slide them into the
b
center section.
c Insert the foam block around the bottom of the library and the
pallet.
d Insert and attach the stop blocks underneath the library on the
right side.
e Attach the wooden bar on the right side of the library.
f Remove the wooden bar on the left side of the library.
Repeat steps d and e for the left side of the library.
g
4 Place the accessory kits into the cutouts on the back crate panel.
5 Place the foam cap over the library.
6 Wrap the cardboard crate around the library (see
fasten it using the plastic restraining clips.
7 Place the top onto the crate.
8 Secure the crate with two steel restraining bands.
Quantum P4000 and P7000 Libraries User's Guide
Appendix B Relocating the Library
Crating the Library
figure 61) and
113