Translate Table - Printronix P5000 Series User Manual

Auto Skip At End
Specifies whether or not to perform an automatic form feed at the
end of a print buffer. If form feed is the last character in the print
order, the form feed function is supplied by the Auto Skip At End
option.
•
On. Sets the printer to print at print position 1 of the first line of
the next form.
•
Off. Sets the printer to print at print position 1 of the next line.
FF After Job
Determines the print position after an operator-initiated local copy
(print screen function).
•
On. Performs an automatic form feed command unless a form
feed was the last one executed. The printer is set to print at
print position 1 of the first line on the next form.
•
Off. Performs an automatic new line command after completing
a print buffer (unless a new line, form feed, or carriage return
command was the last one executed). The printer is set to print
at print position 1 of the next line.
CR, EM, and NL (3287 only)
CR (Carriage Return), EM (Error Message), and NL (New Line)
specify that the printer treat the CR, EM, and NL control codes
either as spaces or as control codes.
•
On. Treats the CR, EM, and NL commands as control codes.
•
Off. Treats the CR, EM, and NL commands as spaces.

Translate Table

Defines which translate table to use for printing.
•
Default. Translates data by using the default table of the
current character set.
•
Downloaded. Translates data from EBCDIC to internal code
by using the downloaded translate table.
Coax Emulation
147