Prt To Emulate - Printronix P5000 Series User Manual

Chapter 4
IGP/VGL Emulation
Host PI
•
Disable. The host does not send PI signals.
•
Enable. The host sends PI signals. The Data Bit 8
configuration option must be disabled to transmit the PI line to
the printer.
Max PI 16
•
Enable. A paper slew of 0-15 will move 1-16 lines.
•
Disable. A paper slew of 1-15 will move 1-15 lines. A paper
slew of 0 will always move 1 line.

Prt To Emulate

This option allows you to select an earlier model printer/IGP board
combination to emulate. When a printer emulation is selected, the
scaling command causes the printer to generate a graphic image in
the same density as the printer emulation chosen. Five types of
printers can be emulated: MVP or MVP 150B, L150, P3040, P6000,
and P9000. Once a printer emulation is selected, it remains active
until the printer is turned off or another printer emulation is selected.
All new users with new applications should select the "Disable"
option, which insures the printer behaves as described in this
manual. The other compatibility modes are required to emulate the
behaviors of older printers which may be inconsistent with the
documented VGL functionality. Proper use of this feature requires
the printer to be equipped with high resolution hammer bank tips
(12 mil).
134