Release The Paper Chains (Cabinet Models) - Printronix P5000 Series User Manual

Chapter 2
Remove Packing Materials

Release The Paper Chains (Cabinet Models)

Tie Wraps (2)
Figure 14. Releasing the Paper Chains
NOTE: If you have the power paper stacker installed, skip this
1. Open the cabinet rear door.
2. Cut the tie wraps and release the paper chains from the bags at
the top rear of the printer frame. Remove the tie wraps and
bags.
3. Make sure each chain hangs freely with no kinks or knots.
32
procedure and go to "Remove The Shipping Restraints
From The SureStak Power Paper Stacker" on page 35.
Paper Chains (8)
Bags (2)