•
Bottom of Line (the default). Text is positioned as if it were at the bottom
of a 6 lpi line space. The following example shows both Top of Line and
Bottom of Line text positions:
Dot
Row
Top of Line Space
Bottom of 8 LPI Line Space
Bottom of 6 LPI Line Space
Top Margin
Defined in linespaces, starting from line zero at the top of the page and
incrementing from the top down.
The range is 0-451 linespaces, and the factory default is 0 linespaces.
Translate Table
•
Default (the default). The option is disabled. The table is not stored in the
real translation table until the option is enabled.
•
Downloaded. The option is enabled. The LU3 Translation Table is
loaded from the buffer into the permanent table.
Translation Tbl (Coax, TN3270)
Prints SCS and DSC/DSE tables of the coax interface's current character set.
This operation is valid only when the coax interface is selected as the current
interface.
Translation Tbl (SPC Coax)
Prints a table of the coax interface's current character set. This operation is
valid only when the coax interface is selected.
Translation Tbl (SPC Twinax)
Prints a table of the twinax interface's current character set. This operation is
valid only when the twinax interface is selected.
Text Position
Top of Line
Emulation Submenus
Text Position
Bottom of Line
231
Need help?
Do you have a question about the SL5000 and is the answer not in the manual?
Questions and answers