Printronix P5000 Series User Manual page 179

Define CR Code
This option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the
data stream. Do not use this feature if the host computer sends line
feeds to the printer.
•
CR = CR. Does not insert an extra line feed after each carriage
return.
•
CR = CR + LF. Inserts an extra line feed after each carriage
return. The next print position will be print position 1 of the next
line.
Auto LF
This option defines the printer action when print data is received
past the forms width setting.
•
Disable. Discards any data past the forms width.
•
Enable. Performs an automatic carriage return and line feed
when data is received past the forms width.
Define LF Code
•
LF = CR + LF. Forces an automatic carriage return with each
line feed command received. The next print position is print
position 1 of the next line.
•
LF = LF. Does not perform an automatic carriage return when a
line feed command is received. The next print position will be
the current print position of the next line.
P-Series XQ Emulation
179