Printronix P5000 Series User Manual page 146

Chapter 4
Coax/Twinax (CTHI) Emulation
Position Aft FF (4234 only)
Allows you to select the location of the print position after a form
feed command is sent.
•
On. Sets the printer to print at print position 1 of the first print
line on the next form.
•
Off. Sets the printer to print at print position 2 of the first print
line on the next form.
Last Char = FF
Determines the print line position when a form feed command is the
last code encountered in the print buffer.
•
On. Moves to the first print position on the second line of the
next form.
•
Off. Moves to the first print position on the first line of the next
form.
NOTE: This option is ignored if Auto Skip At End is on.
If configured as a 3287, and a form feed occurs in the middle of a
print buffer, the printer defaults to the first print position on the
second line of the next form regardless of the setting of this option.
Null Suppression
•
On. Treats nulls as blank spaces.
•
Off. Ignores nulls. The print position does not move.
FF Validity
Determines if the position of a form feed command affects its
execution.
•
On. Allows the printer to perform a form feed command
anywhere in the data stream.
•
Off. Performs a form feed only if it occurs at the first print
position in a line or at Maximum Print Position +1. A form feed
command at any other position is recognized as a space.
146