P2 Card Status Display - Panasonic AG-HPX300 Operating Instructions Manual

3
Press the SET button
The input window (soft keyboard) for modifying
metadata is displayed. Use the keyboard to modify
the metadata.
The keyboard operation is the same as [Checking and
modifying read metadata] (page 124).

P2 Card Status Display

P2 Card Status Display Settings
Select PROPERTY > CARD STATUS from the thumbnail
menu to set the desired indication mode (remaining free
space or used memory capacity) for the P2 card status
display.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the MENU button and select PROPERTY
PROPERTY SETUP
thumbnail menu.
The following screen appears. Select the P2 card
status display settings from the P2 CARD CAP menu
option.
REMAIN:
Show remaining free space on the P2 card as the P2
card status display. (Factory setting)
USED:
Show used memory capacity on the P2 card as the
P2 card status display.
130 Manipulating Clips with Thumbnails : Properties
P2 CARD CAP from the
4
Press OK on the keyboard to write the modified
metadata on the clip and return to the metadata
window.
The input window (soft keyboard) for modifying
metadata is displayed. Use the keyboard to modify
the metadata.
Note
Deleting only the respective items of LOCATION
(recording location data) in SHOOT is not possible. By
setting ALTITUDE to empty, other LONGITUDE/
LATITUDE items are collectively deleted.
The metadata for a clip with the
indicator cannot be modified. For the clips recorded on
multiple P2 cards, modify the metadata while all P2
cards are inserted.
Any MEMO with 100 characters or more cannot be
modified.
incomplete clip