Panasonic AG-HPX300 Operating Instructions Manual page 84

To format an SD memory card
Note
SD memory cards may be formatted via the thumbnail
screen. For more information, see [Formatting SD memory
cards] (page 127).
1
Navigate the menu to the <SD CARD READ/WRITE>
screen.
2
Turn the JOG dial button to move the cursor to the
menu option CARD CONFIG.
3
Press the JOG dial button to display the following
message:
CONFIG?
YES
#
NO
84 Adjustments and Settings for Recording : Handling data
4
To format the SD memory card, turn the JOG dial
button to move the cursor to YES. Then, press the dial
button.
When the SD memory card has been formatted, the
following message appears:
CONFIG OK
The card will not be formatted if the following message
appears when the JOG dial button is pressed:
Error message
CONFIG NG
NO CARD
(No SD memory card inserted.)
CONFIG NG
ERROR
(SD memory card cannot be
formatted.)
CONFIG NG
WRITE PROTECT
(SD memory card is write-
protected.)
CONFIG NG
CANNOT ACCCESS
(SD memory card not
accessible).
5
To exit the menu, press the MENU button.
The settings menu disappears and the status of the
unit is indicated at the top and bottom of the
viewfinder screen.
Note
If an SD memory card is inserted or removed with the
<SD CARD READ/WRITE> screen open, the data
title cannot be edited.
Move the cursor to the option TITLE READ and press
the JOG dial button.
Edit the data title.
Remedy
Insert an SD memory card.
The card may be defective.
Replace the card.
Remove the card and cancel
the protect.
Example: The SD memory card
is not accessible because it is
being played back.
After the operation in process,
format the card.