P2 Card Status Display - Panasonic AG-HPX370 Operating Instructions Manual

REC RATE:
The recording frame rate is displayed. (Only
displayed for clips recorded using native recording
with the VFR function.)
5 Clip Meta Data
Displays more detailed data about the clip. Use the
cursor buttons to move the pointer, and press the
SET button to check the detailed content. For more
information on displayed metadata, see [Setting of Clip
Meta Data] (page 119).
Modification of recorded clip metadata
1
 Displaythewindowfordetailedclipmetadata
thatyouintendtomodifyintheclipproperties
window.
2
 Placethecursorontheitemtobemodified
usingthecursorbutton.
• The metadata that can be modified are shown like
[CREATOR] in the following figure.
3
 PresstheSETbutton.
• The input window (soft keyboard) for modifying
metadata is displayed.
• Use the keyboard to modify the metadata.
Use the keyboard operations described in
[Checking and modifying read metadata]
(page 120).
16
4
 PressOKonthekeyboardtowritethemodified
metadataontheclipandreturntothemetadata
window.
 NOTE
• LOCATION (recording location data) data for a SHOOT
cannot be deleted independently. Thus by setting ALTITUDE
to empty will also delete the LONGITUDE and LATITUDE
settings.
• The metadata for a clip with the
cannot be modified. Metadata on clips recorded on multiple
P2 cards must be modified when all P2 cards that contain the
data are inserted.
• Any MEMO with 101 characters or more cannot be modified.

P2 Card Status Display

 P2 Card Status Display Settings
Select PROPERTY  CARD STATUS from the thumbnail
menu to set the desired indication mode (remaining free
space or used memory capacity) for the P2 card status
display.
1
 PresstheTHUMBNAILbutton.
• The thumbnail screen appears on the LCD
monitor.
2
 PresstheTHUMBNAILMENUbuttonand
selectPROPERTYPROPERTYSETUP
PCARDCAPfromthethumbnailmenu.
• The following screen appears. Select the P2 card
status display settings from the P2 CARD CAP
menu option.
REMAIN:
Show remaining free space on the P2 card as
the P2 card status display. (Factory setting)
USED:
Show used memory capacity on the P2 card as
the P2 card status display.
! incomplete clip indicator