Table of Contents
Advertisement
3
Press the SET button
The input window (soft keyboard) for modifying
metadata is displayed. Use the keyboard to modify
the metadata.
The keyboard operation is the same as [ Checking and
modifying read metadata ] (page 126).
P2 Card Status Display
P2 Card Status Display Settings
Select PROPERTY > CARD STATUS from the thumbnail
menu to set the desired indication mode (remaining free
space or used memory capacity) for the P2 card status
display.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the MENU button and select PROPERTY →
PROPERTY SETUP → P2 CARD CAP from the
thumbnail menu.
The following screen appears. Select the P2 card
status display settings from the P2 CARD CAP menu
option.
REMAIN:
Show remaining free space on the P2 card as the P2
card status display. (Factory setting)
USED:
Show used memory capacity on the P2 card as the
P2 card status display.
132
Manipulating Clips with Thumbnails : Properties
4
Press OK on the keyboard to write the modified
metadata on the clip and return to the metadata
window.
The input window (soft keyboard) for modifying
metadata is displayed. Use the keyboard to modify
the metadata.
Note
Deleting only the respective items of LOCATION
(recording location data) in SHOOT is not possible. By
setting ALTITUDE
to
LATITUDE items are collectively deleted.
The metadata for a clip with the
indicator cannot be modified. For the clips recorded on
multiple P2 cards, modify the metadata while all P2
cards are inserted.
Any MEMO with 100 characters or more cannot be
modified.
empty, other
LONGITUDE/
incomplete clip
Advertisement
Table of Contents
