Panasonic AG-HPX300 Operating Instructions Manual page 74

Information Item
17. Color temperature
18. Filter position
19. Dynamic range
stretcher mode
20. WHITE BAL switch
position
21. Stored gain
indication
22. Gain value
23. Audio input channel
and level meter
24. Super black ON
25. Super iris ON
26. Iris override
indication
27. Iris, F value
28. Zoom indication
29. INTERVAL REC/PRE-
RECORDING
indication/
SD memory card
remaining free space
30. FILM-REC
74 Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Indication
¢ . ¢ K
1 - 4
A - D
–
DRS
A
B
P
6 : /10 : /12 : /15 : /20 :
¢¢ dB
- - - - - - - - +
F
W
R
B
S
+ +
+
– –
–
(No indication)
NC
OPEN
F1.7 - F16
CLOSE
Z00 - Z99
[i]
(blink)
(blink) ¢¢h¢¢m/¢¢s
P-REC (blink)
[SD]
¢¢ h ¢¢ m
END
F
Color temperature assigned to A, B, and PRST of the WHITE BAL switch
(this is a value stored at AWB performance or a value set through the menu
option). The indication is not provided in ATW mode.
This indicates the position of the ND filter.
This indicates the position of the CC filter.
This indicates that the filter has not been set to a proper position.
This appears when the video level of a part with high brightness is
compressed, and the function stretching the dynamic range is selected.
WHITE BAL switch positioned at [A].
WHITE BAL switch positioned at [B].
WHITE BAL switch positioned at [PRST].
Storage gain (DS.GAIN) value (when active)
Current gain value.
Selected channel together with its audio level.
AUDIO IN switch is positioned at FRONT.
AUDIO IN switch is positioned at W.L.(WIRELESS)
AUDIO IN switch is positioned at REAR.
Super black ON.
Super iris ON.
Correction phase of the iris override (when active)
+ + : On the open side by 1
– – : On the closed side by 1
No indication : Standard status
Lens cable is not connected.
Lens iris is at maximum.
Lens iris value
Lens iris closed.
Note
These indications are provided when the lens is capable of indicating the iris
value. When the iris is being overridden, they blink.
Zoom degree is indicated. This indication is not provided for a lens that does
not return the zoom position, even if the indication is set to ON.
Displayed before and after operation during INTERVAL REC mode.
Displayed during INTERVAL REC operation.
Displays the pause time before the next recording during INTERVAL REC.
Indicated while pre-recorded video and audio are being recorded on the P2
card. If the USER switch is set to perform the PRE-RECORDING function,
either "P-REC OFF" or the specified duration "1s - 8s" is displayed when the
PRE-RECORDING mode is switched by pressing the USER switch.
If a video encoder card (AJ-YAX800G, optional accessory) is attached, the
remaining free space on the SD Memory card will be displayed when the
MODE CHECK button is pressed during proxy recording.
[END] is displayed when there is no remaining free space.
Displayed when FILM-REC is selected in GAMMA MODE SEL
Status
+: On the open side by 0.5
–: On the closed side by 0.5