Setting Color Temperature Manually - Panasonic AG-HPX300 Operating Instructions Manual

Setting Color Temperature Manually

The white balance can be manually adjusted by setting the
color temperature. Manual color temperature settings can
be performed for each of the WHITE BAL switch positions:
PRST, A and B.
The color temperature is set using the menu options
COLOR TEMP PRE, COLOR TEMP A, and COLOR
TEMP B.
These options can be found in the <WHITE BALANCE
MODE> screen, which is accessible from the CAM
OPERATION page.
There are two types of color temperature adjustment for
COLOR TEMP PRE: VAR or 3.2K/5.6K Switchable.
VAR: Selectable within the range from 2300K to
8000K.
3.2K/5.6K:
Switchable between 3200K and 5600K.
Refer to [WHITE BALANCE MODE] (page 179).
Note
Even if the color temperature has been manually set,
automatic adjustment of the white balance (AWB) records
the color temperature at the time of AWB at the position
where the WHITE BAL switch was located. When the CC
filter position is switched, the value for the color
temperature changes.
# < WHITE BALANCE MODE >
FILTER INH :ON
SHOCKLESS AWB :NORMAL
AWB AREA :25%
TEMP PRE SEL SW :3.2K/5.6K
COLOR TEMP PRE :3200K
AWB A TEMP :2600K
AWB B TEMP :3200K
Viewfinder displays related to white balance
See [ Viewfinder Screen Status Displays ] (page 68).
Adjustments and Settings for Recording : Adjusting the White balance and Black Balance
47