Panasonic AG-HPX300 Operating Instructions Manual page 161

REC FUNCTION
Items/ Adjustable
Data Saved Range
INTERVAL ON Sets INTERVAL REC function.
ON: Uses internal memory to perform
REC MODE ONE SHOT
interval recording.
OFF
ONE SHOT:
Performs "one-shot" recording for the
duration specified under REC TIME,
and then stops.
OFF: INTERVAL REC is not performed.
Note
This item cannot be changed when "ON"
– C U F –
is selected in LOOP REC MODE.
INTERVAL ON Selects whether INTERVAL REC MODE
REC HOLD OFF settings are retained or not when the
power is turned off once.
ON: Retain
OFF: Do not retain. The INTERVAL REC
– C U F –
1 00s01f Set REC TIME (1 cut).
REC TIME*
Note
:
59s29f However, the settings can be made
frame by frame, and the numbers of the
cut-off unit frames for the shortest time
period and the set time on the actual
operation may vary with the recording
method. For details, refer to [Interval
Recording] (page 37).
– C U F –
1 00h00m00s01f Specify PAUSE time for recording.
PAUSE TIME*
Note
:
00h04m59s29f However the settings can be made frame
:
by frame, and the numbers of the cut-off
23h59m59s29f
unit frames for the shortest time period
and the set time on the actual operation
may vary with the recording method. For
details, refer to [Interval Recording]
(page 37).
– C U F –
TAKE TOTAL NONE Specify the time needed for shooting.
Select from NONE (continue until
TIME :
operation is manually stopped) to 5 days.
5day
– C U F –
TOTAL REC 00m00s01f Display total recorded time. The setting
cannot be changed using this option.
1 :
TIME*
Displays the recording time (recording
99m59s29f
time needed for the P2 card) calculated
OVER100min
using REC TIME, PAUSE TIME, and
NONE
TAKE TOTAL TIME.
Note
A value based on actual processing is
– – – – –
displayed .
AUDIO REC ON Select whether or not sound will be
OFF recorded.
– C U F –
START DELAY 0SEC Set the delay after pressing REC START
to start recording in INTERVAL REC.
:
10SEC
– C U F –
PRE REC ON Select whether or not to enable PRE-
OFF RECORDING.
MODE
ON: PRE-RECORDING enabled.
OFF: PRE-RECORDING disabled.
Note
Specify the PRE-RECORDING time by
using the menu option PRE REC TIME.
– C U F –
*1 This variable range is the numerical values for 59.94 Hz. For
50 Hz, the frame rate is up to 24f. The frame rate is up to 23f
in 24PN (Native) mode.
The ____ in the Adjustable Range column indicates the
preset mode.
Remarks
MODE is OFF whenever the power
is turned on again.
Items/ Adjustable
Data Saved Range
Set PRE-RECORDING.
PRE REC 1SEC
1-8SEC:
TIME :
8SEC Set the length of time that can be
retrospectively recorded before the
REC START button is pressed.
– C U F –
LOOP REC ON Select whether or not to enable LOOP
OFF REC.
MODE
This setting can be used with PRE-
RECORDING features.
ON: Enable LOOP REC.
OFF: Disable LOOP REC.
Notes
After the power is turned off, this item
will default to OFF the next time the
power is turned on.
This item cannot be changed when
"ON" or "ONE SHOT" is selected in
INTERVAL REC MODE.
– – – F –
REC START ALL Select operating modes that allow
recording to start.
NORMAL
ALL: Allow recording to start during
stop, recording pause, and
playback.
NORMAL:
Allow recording to start during stop
and recording pause.
Note
Even if this is set to "ALL", the operation
is "NORMAL", when "ON" or "ONE
SHOT" is selected in INTERVAL REC
MODE.
– C U F –
P.ON REC HOLD Select the recording order of the slot
SLOT SEL SLOT1 when the power is turned on.
HOLD:
The recording order starts with the
card previously selected when the
power was turned off.
SLOT1:
The recording order starts with the
card that is inserted in Slot 1 when the
– C U F –
power is turned on.
Note
Displayed REC TIME, PAUSE TIME and TOTAL REC TIME
are translated into either drop-frame or non-drop-frame
according to the mode of operation.
TAKE TOTAL TIME is actual time. Therefore, TOTAL REC
TIME may incorporate fractions, depending on the settings.
Example of drop-frame
REC TIME
PAUSE TIME
TAKE TOTAL TIME
TOTAL REC TIME
Menu : Menu Description Tables
Remarks
02s00f
02s00f
40min
19m59s06f
161