Deleting A Text Memo - Panasonic AG-HPX300 Operating Instructions Manual

Playing back a clip at the position where a text memo is recorded
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the THUMBNAIL MENU button and select
THUMBNAIL > TEXT MEMO CLIPS from the
thumbnail menu.
The clip thumbnails with text memos attached are
displayed in the upper section of the LCD monitor.
The lower section of the LCD monitor shows
information about the text memo on the clip selected
by the pointer.
Thumbnail
Display
Shows the total number of text
memos attached to the clip.

Deleting a text memo

1
Select the desired text memo by carrying out steps
3
for [Playing back a clip at the position where a text
memo is recorded] (page 120).
2
Move the pointer to the desired text memo, and then
press the SET button.
3
Press the THUMBNAIL MENU button to select
OPERATION > DELETE from the thumbnail menu.
YES and NO appear to confirm deletion. Use the
cursor buttons and the SET button to select YES.
The text memo is deleted.
120 Manipulating Clips with Thumbnails : Text Memo
Shows the still image that the
text memo is related to.
3
Move the pointer over the clip that contains the
desired text memo to playback and press the SET
button.
The pointer moves to the lower part of the LCD
monitor.
4
With the pointer located in the lower part, move the
pointer to the desired text memo number using the
cursor right and left buttons ( "! ). Then, press the
PLAY button.
5
Playback will start from the time code position of the
text memo where the pointer is located. If the STOP
button is pressed during playback or the playback has
finished at the end of the clip, then the thumbnail
screen appears again with the pointer replaced with
the text memo where the playback started.
6
Press the THUMBNAIL MENU button to select EXIT
or press the EXIT button to return the pointer to the
upper part of the thumbnail screen.
1 -
The pointer moves down.