Menu Description Tables - Panasonic AG-HPX300 Operating Instructions Manual

SYSTEM SETTING
SYSTEM MODE
Items/ Adjustable
Data Saved Range
For setting the system frequency and the
SYSTEM 1080-59.94i
recording format of the unit.
MODE 1080-50i
When this item is switched, turn "OFF"
480-59.94i
the POWER switch on the unit and then
576-50i
turn it "ON" again.
Notes
When the remote control unit (AJ-
RC10G) is connected, this item is not
displayed.
To switch this item, operate the main
unit independently.
When the time code is in free run
mode and a change is made to the
SYSTEM MODE menu option, the
time may not be correctly recorded.
After turning on the camera-recorder,
check the time code and make a
change to the setting if required.
When USB DEVICE mode is selected,
no change can be made to this option.
– C U F –
REC SIGNAL CAM Select video input signals.
CAM : Record the signal from the
VIDEO
1394
VIDEO:Record the signal from the
SDI
1394: Record the signal from the 1394
SDI: Records input to the SDI IN
Notes
In Native mode for the AVC-Intra and
DVCPRO
selected.
After the power has been turned OFF,
this setting defaults to CAM when the
power is turned ON again.
In order to select VIDEO and
synchronize video signals input to the
GENLOCK IN connector (VBS) with
the unit, set the GENLOCK item of
[ GENLOCK ] (page 163) to "EXT".
– C U F R
For setting the video system for
CAMERA (1080-59.94i
shooting.
MODE /480-59.94i)
Note
60i
In AVC-Intra mode, 24PA cannot be
30P
selected.
24P
24PA
(1080-50i
/576-50i)
50i
25P
– C U F R
ASPECT 16:9 Select the aspect ratio for recording. (In
4:3
SD mode only
16:9: Record in <16:9> aspect ratio.
4:3: Record in <4:3> aspect ratio.
– C U F R
The ____ in the Adjustable Range column indicates the
preset mode.

Menu Description Tables

Remarks
camera
GENLOCK IN connector (In SD
mode only
input connector
connector (optional).
HD, 1394 cannot
Items/ Adjustable
Data Saved Range
OFF
SCAN
ON
REVERSE
– C U F R
VF TYPE HD
SD
– C U F R
REC MODE AVC -I 100
AVC -I 50
DVCPRO HD
DVCPRO50
– C U F R
SETUP
0%
7.5%A
– C U F R
PC MODE USB HOST
USB DEV.
be SELECT
– – – F –
PC MODE ON
OFF
– – – F –
Remarks
Specify whether image correction is
used or not, when an anamorphic lens
or a lens for film applications is used.
OFF: Images are not corrected.
ON: Images are corrected. The vertical
and horizontal orientations are
inverted.
Specify the type of viewfinder to be
attached to the camera-recorder.
Select the recording mode.
AVC-I 100:
Record in AVC-I 100 format
AVC-I 50:
Record in AVC-I 50 format
DVCPRO HD:
Record in DVCPRO HD format
DVCPRO50:
Record in DVCPRO50 format. (In SD
mode only
Notes
If "1394" is selected in REC SIGNAL,
AVC-I 100 and AVC-I 50 cannot be
selected.
Switch the setup. (For 480-59.94i only
0%: Setup is switched to 0% for both
the camera output and the
recording.
7.5%A: Setup is switched to 7.5% for the
camera output and 0% for the
recording.
Specify the operation mode of the
camera-recorder when an external
device is connected via USB.
USB HOST:
Sets the camera-recorder to the mode
that allows an external hard disk drive
to be connected.
USB DEV.:
Sets the camera-recorder to the USB
device mode, which allows a PC to be
connected via USB 2.0 for use with
P2 cards as mass storage.
Note
When the PC MODE menu option is set
to ON, no change can be made to this
option.
Used to enable or disable the mode that
allows the camera-recorder to be
connected to a PC or an external hard
disk drive via USB 2.0.
ON: Sets the camera-recorder to the
mode selected through the PC
MODE SELECT menu option.
OFF: Disables the PC MODE for normal
operation.
Note
Once the power is turned off, the option
is always set to OFF when the power is
turned on next time.
Menu : Menu Description Tables
159