P2 Card Status Display - Panasonic P2HD AG-3DP1G Operating Instructions Manual

 NOTE
• LOCATION (recording location data) data for a SHOOT
cannot be deleted independently. Thus by setting ALTITUDE
to empty will also delete the LONGITUDE and LATITUDE
settings.
• The metadata for a clip with the
cannot be modified.
• The clip meta data for a clip cannot be modified if the source
of clip is inserted in a wrong orientation in P2 card slot L
and R or if the source of a 3D or 2D LL clip is not inserted in
either slot L or R.

P2 Card Status Display

 P2 Card Status Display Settings
Select PROPERTY  CARD STATUS from the thumbnail
menu to set the desired indication mode (remaining free
space or used memory capacity) for the P2 card status
display.
1
 PresstheTHUMBNAILbutton.
• The thumbnail screen appears on the LCD
monitor.
2
 PresstheMENUbuttonandselectPROPERTY
PROPERTYSETUPPCARDCAPfrom
thethumbnailmenu.
• The following screen appears. Select the P2 card
status display settings from the P2 CARD CAP
menu option.
REMAIN:
Show remaining free space on the P2 card as
the P2 card status display. (Factory setting)
USED:
Show used memory capacity on the P2 card as
the P2 card status display.
!
incomplete clip indicator
 Contents of P2 Card Status Display
Settings
From the thumbnail menu, select PROPERTY  CARD
STATUS. The following screen appears.
When"REMAIN"isselected:
1 2
5
4
1 Write-protect mark
The mark appears if the P2 card is write-protected.
2 L/R P2 card status (remaining free space)
The remaining memory capacity of the P2 card is indicated
by a bar graph and percentage. The bar graph indicator
moves to the left as the remaining free space decreases.
The following indications may appear, depending on the
card status:
FORMAT ERROR!:
An unformatted P2 card is inserted.
NOT SUPPORTED!:
An unsupported card is inserted in the camera.
NO CARD!:
No P2 cards are inserted.
Use the cursor button to place the cursor on the P2
card for data you want to access and press the SET
button to display detailed information about the P2
card to check individual information such as the serial
number and the user ID.
3 L/R P2 card remaining capacity/total capacity
Displays the P2 card remaining capacity and total
capacity in minutes. The digits representing less than
minutes are rounded down.
Note that the indicated capacity will vary according to
the frame rate in native recording with VFR operation.
The remaining capacity becomes 0 with a P2 card on
which the number of recorded clips reached the limit or
with a write-protected P2 card.
4 Remaining 3D/2D LL recording capacity
Displays the remaining capacity for recording,
calculated from the remaining free space of the P2
cards inserted in card slots L and R.
5 Warning symbol
Inserting the following type of P2 cards will display the
( ) symbol.
3
103