F97 Selection Of Copy Function - SMC Networks PF3W3 Series Operation Manual

■[F97] Selection of copy function
The set values can be copied. The set values of flow rate and functions can be copied. When the output
specifications (switch output or analogue output) and/or unit specifications are the same, this function
becomes available. The set value can be copied up to 10 switches simultaneously.
<Connection>
Connect the pressure switches after turning off the power supply.
Connect the copy source flow monitor and the copy destination flow monitors with copy lead wire
(ZS-40-Y), and turn on the power supply.
The copy source flow monitor is the flow monitor from which the setting is copied.
The copy destination flow monitor is the monitor to which the setting is copied.
-56-
No.PF※※-OMN0012-I