SMC Networks PF3W3 Series Operation Manual page 38

3. Input of set values
a. When hysteresis output mode is selected.
The sub screen displays the set value. Change it with the
(When reversed output is selected, the main screen displays [n_2].)
Press the
The sub screen displays the hysteresis value. Change it with the
Press the
4. Completed
∗: The set value and hysteresis limit each other.
b. When window comparator output mode is selected.
The sub screen displays the set value. Change it with the
(When reversed output is selected, the main screen displays [n2L].)
Press the
The sub screen displays the set value. Change it with the
(When reversed output is selected, the main screen displays [n2H].)
Press the
The sub screen displays the hysteresis value. Change it with the
Press the
4. Completed
button to confirm. Move on to the setting of hysteresis.
button to confirm. Return to the function selection mode.
[F 2] Setting of OUT2 is completed.
button to confirm. Move on to the input of set values for [P2H] (or [n2H]).
button to confirm. Move on to the setting of hysteresis.
button to confirm. Return to the function selection mode.
[F 2] Setting of OUT2 is completed.
-38-
and buttons.
and buttons.
and buttons.
and buttons.
and buttons.
No.PF※※-OMN0012-I