Advanced > Routing > Static Route - NetComm NB9WMAXX User Manual

Advanced > Routing > Static Route
Static routing allows computers that are connected to the NB9WMAXX to communicate with computers on
another LAN segment which are connected to the NB9WMAXX via another router. See diagram below for
example setup:
To set a static route, click add and enter the relevant details in the fields e.g. 192.168.1.2
Field
Destination Network
Address
Subnet Mask
Use Gateway IP Address
NB9WMAXX ADSL+ VoIP Router
YML89 Rev1
Entry
LAN IP of destination address
Enter Subnet Mask for same
Remote router gateway address
1