NetComm NB9WMAXX User Manual page 26

Field
Enable Phone 1 call
waiting.
Enable Phone 2 call
waiting.
Call forward Type:.
Signaling and Media QoS.
Once you have input these settings, click Apply and Save VoIP Parameters which will save your settings and
attempt to register the NB9WMAXX with your VSP.
Click on Basic>Home to check the status of your VoIP service. In the Basic-Status window, you will see the
following status indicators:
VoIP Status Indicator
Direct Mode
SIP Registration Fail
SIP Registration Success

Means
To enable Call waiting feature on Phone 1.
To enable Call waiting feature on Phone 2.
To enable call forward on phone1 and 2. Calls to the account will be forwarded to the
nominated phone number in "Call Forward Phone Number" field.
Leave as default unless instructed by your VoIP Service Provider.
Means
VoIP is available but you are not connected to a SIP service. You are only able to make VoIP
calls by entering IP details of remote device.
Usually indicates Invalid VoIP/SIP User ID and Password (= VoIP phone number and
Authorisation Code). Check VoIP entries and try again.
Connected to VSP; ready for VoIP phone calls. In this case you will hear a normal dial-tone.
NB9WMAXX ADSL+ VoIP Router
YML89 Rev1