Setting Up Your Voip Account - NetComm NB9WMAXX User Manual

4. Setting up your VoIP account

Once you have successfully connected to the Internet you are ready to setup your VoIP account to start
making telephone calls over the Internet. This section will deal with setting up a single VoIP account with
standard settings.
Note: Make sure you get all your necessary VoIP account details from your VSP (VoIP Service Provider) before you begin. These details
are not your ADSL User Name and Password.
The NB9WMAXX ships with different dial tones enabled to provide the user notice when a call is being placed
using your VoIP provider or not. On picking up the handset, if a stutter tone is heard this is normal and means
the call will proceed via your VoIP Service Provider.
If an Australian dial tone is heard, your VoIP service is not available. Calls will be made out via the PSTN port
and be billed by your PSTN provider at possibly more expensive rates.
Your VoIP checklist includes:
• VoIP/DID Phone Number;
• VoIP account username (known as 'Auth. ID' in your NB9WMAXX);
• VoIP account password (known as 'Auth. Password' in your NB9WMAXX);
• SIP Proxy Server IP address;
• SIP Proxy Port;
• SIP Proxy Domain;
• Register Expire Time.
Once you have the above settings (crucial ones being VoIP/DID Phone Number, Auth. ID, Auth. Password and
SIP proxy) you are ready to start setting up your VoIP service on your NB9WMAXX.
1. If you are not already logged into your NB9WMAXX, open a web browser and navigate to
http://192.168.1.1 and login with the NB9WMAXX username & password (admin / admin);
1 NB9WMAXX ADSL+ VoIP Router
YML89 Rev1