Drum Refresh - Kyocera KM-C4008 Operation Manual

Section 7 COPIER MANAGEMENT

Drum refresh

Perform the following procedure if it seems like the printed image
is blurred or running, or if there are unprinted white areas on the
page. The drum refreshing operation will take approximately
5 minutes.
1
With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting" screen will be displayed.
2
Press the "User adjustment" key.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
7-104
Language Management
MP tray Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
Register Print User
Adjustment
orig. size report
3
Press the "Drum refresh" key. The "Drum refresh" screen
will be displayed.
Inch specifications
User adjustment
Auto gray
adjust
efault setting
Metric specifications
User adjustment
Auto Grey
Adjust
efault setting
4
Press the "On" key. The drum refreshing process will begin.
This operation will take approximately 5 minutes.
End
Inch specifications
Drum refresh
Refresh the drum when image blur or white dots appear
on the image.
Default setting - User adjustment
nd
Metric specifications
Drum refresh
Refresh the drum when a white omission in outputted copie
image.
Default setting - User adjustment
efault setting / Counter
rum
refresh
efault setting / Counter
rum
refresh
Close
Close
Close
On
lose
On