Paper Type (Set Fixing Temperature) - Kyocera KM-C4008 Operation Manual

Paper type (Set fixing temperature)

Perform the following procedure to set the fixing temperature for
each custom paper type (custom 1 – custom 8).
1
Display the "Machine default" screen.
(See "Accessing the machine default settings" on
page 7-44.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
2
Select "Paper type (Fixing set)" under the "Default menu"
column on the left side of the touch panel and then press
the "Change #" key.
The "Paper type (Fixing set)" screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Check MP tray sizing
Paper type (Fixing set)
Select paper type(2sided)
Orig. Set Direction
Sleep mode changing time
Default setting
Metric specifications
efault setting / Counter
Machine default
efault menu
Check bypass sizing
Paper type (Fixing set)
Select paper type(2sided)
Sleep mode changing time
Low power mode chng. time
efault setting
Language Management
MP tray Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
check
setting
Register Print User
Adjustment
orig. size report
Setting mode
On
Top Edge
Change #
60 Minute
Setting mode
On
60 Minute
Change #
15 Minute
3
Select one of the "custom" paper type settings ("Custom 1"
through "Custom 8") under the "Default menu" column on
the left side of the touch panel and then press the "Change
#" key.
Inch specifications
Paper type (Fixing set)
ustom 1
ustom 2
ustom 3
ustom 4
ustom 5
ustom 6
End
ustom 7
Default setting - Machine default
Metric specifications
Paper type (Fixing set)
ustom 1
ustom 2
ustom 3
ustom 4
ustom 5
ustom 6
nd
ustom 7
Default setting - Machine default
4
If you are using thick paper, select the "Normal" key.
Inch specifications
ustom 1
Default setting - Machine default - Paper type (Fixing set)
Close
Metric specifications
Up
ustom 1
Down
Default setting - Machine default - Paper type (Fixing set)
Close
NOTE
Up
If you want to quit the displayed setting without changing
own
it, press the "Back" key. The touch panel will return to the
screen in step 3.
5
Press the "Close" key.
The touch panel will return to the screen in step 3.
6
Press the "Close" key.
The touch panel will return to the screen in step 2.
7
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
8
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Section 7 COPIER MANAGEMENT
an set the temperature of each paper type.
Default menu Setting mode
Low
Low
Low
Low
Low
Low
Low
an set the temperature of each paper type.
Default menu Setting mode
Low
Low
Low
Low
Low
Low
Low
Low
Normal
Low
Normal
lose
hange #
lose
hange #
Back lose
Back lose
7-49