Adding A Front And/Or Back Cover To Your Copy Sets [Cover Mode] - Kyocera KM-C4008 Operation Manual

Section 6 OTHER CONVENIENT FUNCTIONS

Adding a front and/or back cover to your copy sets [Cover mode]

With this mode, you can select to have color paper or relatively
thick paper fed as front and/or back covers to your copy sets.
NOTES
• 2-sided copying is not possible from the MP tray.
• It is possible for you to change the drawer[cassette] that
will be used to feed the cover sheets. (See "Cover
drawer[cassette]" on page 7-78.)
You can select separately whether you want both sides or only one
side of both the front and back covers to be copied onto, or to have
either or both of them left completely blank. Select also whether or
not you even want to include a back cover at all.
6-38
Front cover
2 sided copy
*
[Duplex Copy]
Front copy
*
Back copy
Blank
No back cover
* The illustrations above show the result when sets of 2-sided
copies are being made.
If you are making sets of 1-sided copies, copying will not be
performed on the rear side of the covers even if the 2-sided copy
[Duplex Copy] or Back copy settings are selected.
1
Set the originals to be copied.
2
Press the "Function" tab.
The content of the "Function" tab will be displayed.
Back cover